Details
- 2.1-channel system optimized for V-Drums.
- 200W (100W + 50W x 2) power, Class-D amplification.
- Carefully tuned for V-Drums via embedded DSP technology.
- Subwoofer and Full Range modes for application-specific monitoring performance..
- Stereo 3-channel mixer, with versatile input / output options.
- 3-band EQ.
- Satellite speakers can be mounted on PM-30 or V-Drum rack system.
- Casters and side-panel handles for convenient transportation.
Full-Range Sound
With its two satellite speakers and matching 12" woofer enclosure with tweeter, the PM-30 delivers a clear, full-frequency sound. The selectable Full-Range and Subwoofer modes, with accompanying value dial, let you customize the amp’s low-frequency performance, while the built-in 3-band EQ lets you fine-tune the tone from high to low.
Quad Power Pack
Four Class-D power amplifiers are built into the PM-30 system — 100W, 50W, and 50W — for a total of 200 watts of high-performance impact. It’s plenty of power for rehearsals and small- to medium-size venues. Line outputs are provided for tapping into larger systems when needed.
Great for V-Drums®
Roland V-Drum owners will appreciate the PM-30’s special V-Drum input, which accepts a single stereo TRS feed from the V-Drums’ headphone output. But that’s only part of the compatibility story. Roland’s engineers carefully optimized the PM-30 for use with V-Drum kits via newly created DSP.
I/O Options
The PM-30 provides a flexible input path with three input channels (both 1/4" and RCA input types are offered) and two sets of outputs (1/4" line outputs (stereo) are provided, plus an additional pair of outputs for the satellite speakers).
Transport & Setup
A solid crossbar spans the top of the PM-30’s base unit for convenient carrying; two side handles are provided as well. The two satellite speakers can be clamped onto the crossbar or mounted onto a drum rack (as pictured).
- Rated Power Output: 200 W (Main Unit 100 W + Satellite Speaker 50 W x 2)
- Nominal Input Level (1 kHz): INPUT Channel 1 (V-DRUMS): -10 thru +4 dBu, (LINE IN): -20 thru +4 dBu, Channel 2 (LINE IN): -10 thru +4 dBu, Channel 3 (LINE IN): -10 thru +4 dBu
- Nominal Output Level: LINE OUT: +4 dBu, SPEAKER OUT: 50 W / 4 ohms min
- Speakers: Main Unit: 30 cm (12 inches) x 1 (Woofer), 7.7 cm (3 inches) x 1 (Tweeter), Satellite Speaker: 10 cm (4 inches) x 2 (Full Range)
- Controls: PUNCH Switch, Volume Knob, Volume Knob, Volume Knob, Mode Select Switch, Volume Knob, BASS Knob (Equalizer), MIDDLE knob (Equalizer), TREBLE knob (Equalizer), VOLUME Knob, POWER Switch
- Indicator:POWER
- Connectors: Main Unit: V-DRUMS INPUT Jack (stereo 1/4" phone type), LINE IN Jacks (L/MONO, R) (1/4" phone type), LINE IN Jacks (L/MONO, R) (1/4" phone type), LINE IN Jacks (L/MONO, R) (1/4" phone type, RCA phono type), LINE OUT Jacks (L/MONO, R) (1/4" phone type), SPEAKER OUT Jacks (L, R) (1/4" phone type), PHONES Jack (stereo 1/4" phone type), Satellite Speaker: INPUT Jack (1/4" phone type)
- Power Supply: AC 117 V, AC 230 V, AC 240 V (50/60 Hz), AC 220 V (60 Hz)
- Power Consumption: 63W
- Dimensions:
- Main Unit: 451 (W) x 482 (D) x 482 (H) mm or 17-13/16 (W) x 19 (D) x 19 (H) inches (Excluding casters)
- Main Unit: 451 (W) x 482 (D) x 533 (H) mm or 17-13/16 (W) x 19 (D) x 21 (H) inches (Including casters)
- Satellite Speaker: 152 (W) x 158 (D) x 209 (H) mm or 6 (W) x 6-1/4 (D) x 8-1/4 (H) inches
- Weight
- Main Unit: 24.3kg / 53 lbs 10 oz (Excluding casters)
- Main Unit: 25.0 kg / 55 lbs 2 oz (Including casters
- Satellite Speaker: 2.2 kg / 4 lbs 14 oz (for each)
- Accessory: Mount Bar x 2, Clamp x 2, Speaker Cable (3.5 m) x 2
- Size and Weight ( MAIN UNIT )
- Width: 451 mm or 17-13/16 inches
- Depth: 482 mm or 19 inches
- Height: 533 mm or 21 inches
- Weight: 24.3 kg or 53 lbs. 10 oz. w. caster
- Size and Weight ( SATELLITE UNIT )
- Width: 152 mm or 6 inches
- Depth: 158 mm or 6-1/4 inches
- Height: 209 mm or 8-1/4 inches
- Weight: 2.2 kg or 4 lbs. 14 oz. w/o stand
* 0 dBu= 0.775 Vrms

